An air conditioning disconnect (ACD) is a disconnect located between a loadcenter (distribution panel) and air conditioner. EATON ACD product line provides an installer or repair personnel with a visible disconnecting means when performing maintenance. ACDs are also known as disconnects, pullouts or air conditioning switches. Non-fused pullout and molded case switch devices provide personnel with a visible on/off disconnecting means. While fused pullout units also perform this function, they also provide an additional level of protection for the air conditioner. Fused and non-fused devices are of a pullout design, where the user physically removes or "pulls out" a tab to break the electrical connection. A molded case switch is similar to a light switch where the user "switches" the unit to the indicated ON/off position.

EATON Air Conditioning Disconnect, Non-Fused Pullout, 120/240 VAC, 60 A, 10 hp, 10 kA Short Circuit, Padlock Actuator, NEMA 3R Enclosure, 7-1/2 in L x 4-3/4 in W x 13 in H Dimensions, Steel, ANSI 61 Gray, Galvanized

• ON/OFF control provided by a Pull-out handle
• Pull-out handle can be conveniently stored in the compartment in the Off position, helping to prevent the handle from being misplaced
• Protective shield cannot be removed until the pull-out handle is removed, disconnecting the power
• NEMA 3R outdoor enclosures offered in metallic and non-metallic versions
• Easy-to remove high-strength protective shield for easier wiring and mounting
• Easy-to remove front cover no screws or fasteners to remove
• 1 in knockouts on the bottom, back and side of unit
• Copper rated line and load lugs that are easily accessible
• Ample wiring space for mounting with a stud gun (1-keyhole, 2/3-point mounting)
• Horsepower rated (10 hp maximum at 240 VAC)
• Padlockable door provision for safety and reduction of tampering
• Metallic enclosures are bottom entry and exit only
• Non-metallic enclosures have knockouts and a hub provision for top access
• Non-metallic enclosures have a single unit door and protective shield for installer convenience
• Non-metallic enclosures are durable and provide excellent resistance to climate changes
• 10 hp at 240 VAC
• 14 to 3 AWG copper/aluminum wire

• Specification Sheet https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/EATON_DPU222RGF20WTST_Specification_Sheet.pdf