An air conditioning disconnect (ACD) is a disconnect located between a loadcenter (distribution panel) and air conditioner. EATON ACD product line provides an installer or repair personnel with a visible disconnecting means when performing maintenance. ACDs are also known as disconnects, pullouts or air conditioning switches. Non-fused pullout and molded case switch devices provide personnel with a visible ON-OFF disconnecting means. While fused pullout units also perform this function, they also provide an additional level of protection for the air conditioner.

EATON Air Conditioning Disconnect, Non-Fused Pullout, 120/240 VAC, 60 A, 10 hp, 1 ph, 2 Pole, 10 kA Short Circuit, NEMA 3R Enclosure, Surface Mounting, 60 to 75 deg C, 9 in L x 5-1/2 in W x 2 in H Dimensions, Steel, Gray, Hot Dipped Galvanized

• ON/OFF control provided by a Pull-out handle
• Pull-out handle can be conveniently stored in the compartment in the Off position, helping to prevent the handle from being misplaced
• Protective shield cannot be removed until the pullout handle is removed, disconnecting the power
• 14 to 3 AWG copper/aluminum wire

• Technical Bulletin https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/IDW_DOCUMENT_56666e970a64bbd24a43e69d29b7c40c4bc1b2bfbb751b2121fb7e378e5b8e35.pdf
• Specification Sheet https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/IDW_DOCUMENT_6cf21d66e544e18672d51f87ab905370a4bd39ef7ca67037c40af98e6934eb9f.pdf
• Catalog https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/IDW_DOCUMENT_97979633dcaf4fc709f75ff7065ec843bc98a0d71d8e84549a700c5f2f44069d.pdf