EATON E34 series 30.5 mm pushbutton line features the same rugged die-cast construction of our 10250T line with an additional 2-layer 100% solid thermosetting cathodic epoxy coating. This coating provides a flat black smooth, consistent, corrosion-resistant surface that has passed a demanding 600 hr salt spray test.
EATON Non-Illuminated Pushbutton, Corrosion-Resistant Oil/Watertight, Series: E34, 30.5 mm Size, 1NC Contact Configuration, Momentary Contact Mode, 10 A at 600 VAC, 5 A at 250 VDC Contact, Bezel/Housing: Black Bezel, Extended Button Actuator, Screw Terminal, NEMA 3/3R/4/4X/12/13/IP65 Enclosure, Die-Cast Zinc, Epoxy Coated, Red, Environmental Conditions: -17 to 66 deg C Operating Temperature, 95% Relative Humidity at 60 deg C
| Actuator | : | Extended Button |
| Bezel/Housing | : | Black Bezel |
| Contact Mode | : | Momentary |
| Contact Rating | : | 10 A at 600 VAC, 5 A at 250 VDC |
| Enclosure Type | : | NEMA 3/3R/4/4X/12/13/IP65 |
| Environmental Conditions | : | -17 to 66 deg C Operating Temperature, 95% Relative Humidity at 60 deg C |
| Finish | : | Epoxy Coated |
| Material | : | Die-Cast Zinc |
| Series | : | E34 |
| Terminal Type | : | Screw |
| Type | : | Corrosion-Resistant Oil/Watertight |
| Size | : | 30.5 mm |
| Contact Configuration | : | 1NC |
| Color | : | Red |
- Durable chrome finish with added corrosion resistance
- Integral ground screw terminal on operators
- Controlled compression sealing gasket
- Reliability nibs on contact blocks
Specification Sheet
VIDEO LINK
