Hi-lume 3D architectural electronic dimming ballasts are designed to meet the most demanding lighting requirements. By providing industry leading performance with a full range of 100% to less than 1% fluorescent dimming, Hi-lume 3D ballasts enable you to provide the ideal visual environment for any application.

EcoSystem® Hi-Lume® Electronic Ballasts, Dimming, T8 and U-Bend Fluorescent Lamp, 32 W Lamp, 68.9/66.3/66.5 W, 120/240/277 VAC, 0.58/0.28/0.24 A, 50/60 Hz, Programmed/Rapid Start, 50 deg F Minimum Starting, Total Harmonic Distortion: <10%, Power Factor: >0.95, Dimmable: Yes, 2 Lamps, Thermal Protection: Class P, Ballast Factor: 1, 167 deg F, Fixture Mount, 9.5 in H x 2.38 in W x 1 in D

• Continuous, flicker free dimming from 100% to 0.7% for T8, 1% for T5 and T5HO, and 5% for T5 twin-tube
• 100% compatible with all Lutron 3-wire fluorescent controls and EcoSystem® digital controls for consistent fixture-to-fixture dimming performance
• Compatible with energy saver Node with EcoSystem® devices, GRAFIK eye QS control unit, PowPak™ dimming module with EcoSystem® connection, and Quantum software, allowing for integration into an existing or planned EcoSystem® lighting control solution
• Programmed rapid start design preheats lamp cathodes before applying full arc voltage to ensure full rated lamp life while dimming and cycling
• Lamps turn on to any dimmed level without going to full brightness
• Low harmonic distortion throughout the entire dimming range maintains power quality
• Frequency of operation ensures that ballast does not interfere with infrared devices operating between 38kHz and 42kHz
• Inrush current limiting circuitry eliminates circuit breaker tripping, switch arcing, and relay failure
• Ballasts maintain consistent light output for different lamp lengths, ensuring fixture-to-fixture uniformity
• Ultra-quiet operation
• Ballast protected from miswires of any input power to control lead, or from lamp leads to each other and/or ground
• 100% performance tested and burned-in at factory
• Non-volatile memory restores all ballast settings after power failure
• Within a fluorescent fixture mounting