EATON corrosion-resistant E34 range of 30.5 mm pushbuttons features the same rugged die-cast construction of our T series with an additional two layer 100% solid thermosetting cathodic epoxy coating. This coating provides a smooth flat black smooth, flat back, corrosion-resistant surface that has passed a demanding 600 hr salt spray test.
EATON Non-Illuminated Pushbutton Operator, Corrosion-Resistant Square Oil/Watertight Multi-Function, Series: E34, 30.5 mm Size, Momentary Contact Mode, 10 A at 660 VAC/VDC Contact, Flush Button Operator, 600 VAC, NEMA 3/3R/4/4X/12/13/IP65 Enclosure, Flush Mounting, 1 to 150 deg F, Die-Cast Zinc, Epoxy Coated, Black
| Contact Mode | : | Momentary |
| Contact Rating | : | 10 A at 660 VAC/VDC |
| Enclosure Type | : | NEMA 3/3R/4/4X/12/13/IP65 |
| Finish | : | Epoxy Coated |
| Material | : | Die-Cast Zinc |
| Mounting Type | : | Flush |
| Operator Type | : | Flush Button |
| Series | : | E34 |
| Temperature Rating | : | 1 to 150 deg F |
| Type | : | Corrosion-Resistant Square Oil/Watertight Multi-Function |
| Voltage Rating | : | 600 VAC |
| Size | : | 30.5 mm |
| Color | : | Black |
- Heavy duty die-cast zinc construction
- Enclosed silver contacts with reliability nibs
- Diaphragm seals with drainage holes
- Grounding nibs on the operator casing
- Reliability nibs improve contact reliability even under dry circuit and fine dust conditions
- Drainage holes prevent build-up of liquid inside the operator which can prevent operation in freezing environments
- Grounding nibs bite through paint and other coatings to provide secure ground
- Slow make and break contact operation
- All normally closed contacts have positive opening operation, i.e., normally closed contacts are forced open in the event of contact weld or spring breakage
- 6000 operations/hours
- 6562 ft altitude
- Two layer 100% solid thermosetting cathodic epoxy coating
Specification Sheet
VIDEO LINK