Loadcenters are enclosures specifically designed to house the branch circuit breakers and wiring required to distribute power to individual circuits. They contain either a main breaker when used at the service entrance point or a main lug when used as a sub-panel to add circuits to existing service. The main breaker protects the main entire panel and can be used as a service disconnect. The branch breakers protect the wires leading to individual electrical loads such as fixtures and outlets.

EATON Main Circuit Breaker Load Center, 3-Phase, 208Y/120/240 VAC, 200 A, 42 Pole, 10 kA Interrupt, 42 Circuits, BR Breaker, 4-Wire Wiring Configuration, 30 Spaces, 1/0 AWG to 250 kcmil Wire, Flush Mounting, NEMA 1 Enclosure, NEMA L1 Enclosure Box, Metal Housing Material, 3.88 in L x 14.31 in W x 29.13 in H Dimensions

• BR loadcenters have standard tin plated aluminum bus with a limited availability of copper bus
• Raintight boxes are manufactured from galvanized steel, then finished using an electrostatic powder coated, baked urethane paint process
• Flexible neutral design
• Tangential main knockout
• Single key hole mounting
• Factory pre-attached neutral bonding strap
• No feed-thorough lugs
• Copper bus
• Without feed-through lugs

• Specification Sheet https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/EATON_3BR3042BC200_Specification_Sheet.pdf
• Technical Bulletin https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/EATON_3BR3042N200_Technical_Bulletin.pdf